EPDM CATALOG

All products


  • BITUMINOUS MEMBRANES
    ON REQUEST

    For information and orders contact us on phones numbers:  +34 631 258 239 +34 960 032 783 Also at info@epdmvalencia.com...

  • 1.20 MM EPDM CARLISLE
    CUT TO SIZE

    We cut pieces to the size that our client needs, between 15.25 metres maximum width x 30.50 metres maximum length. Price per m2...

  • CARLISLE EPDM PRESSURE-SENSITIVE SECUR TAPE 7.5 CM
    ROLL OF 7.5 CM x 30.50 M

    Facilitates the installation of the EPDM membranes. Ideal for covering and sealing two EPDM membranes, joint seams or simply for joining large custommade parts. As strong as the base sheet.  I...

  • CARLISLE SILICONE JOINTING ROLLER
    4.5 CM

    Standard silicone seam applicator roller. Everhard, model MR05020, with 4.5 cm closed bearing silicone basic fork. Silicone is a particularly high temperature resistant material and is ideal for use ...

  • HP 250 PRIMER CARLISLE
    0.95 LITRE CAN

    Carlisle HP-250 Primer is a solvent-based adhesive used for cleaning and priming the EPDM sheet, thus preparing it for the subsequent application of Flashing or SECUR-TAPE. INSTRUCTIONS FOR...

  • POLYPROPYLENE ANTI-WEED GEOTEXTILE 120 GRAMS
    2 M WIDTH x LENGTH AS REQUIRED

    Non-woven geotextile made of 100% high tenacity Polypropylene staple fibres, mechanically bonded by a needle-punched and heat-set process, stabilised against UV rays.  ADVANTAGES:  - Anti-...

  • VERTICAL BOWL
    80 MM DIAMETER

    This cup model is used to connect the EPDM membrane to the floor drains.  This product facilitates the waterproofing work, while ensuring total watertightness. Resistant to corrosion, ozone, we...

  • PVC FLANGE
    75 MM DIAMETER

    Flange with PVC sleeve.  Today presión PVC fittings are still the only ones on the market with the AENOR quality mark. Flanges (clamps) for the drainage of natural pools, irrigation ponds...

  • ANTI-DRIP PAINT
    12 LITRE CANISTER

    Special anti-drip paint for terraces. Various colours....

  • 1.20 MM CARLISLE EPDM
    CUT PIECES

    From 0.20 to 0.29, 0.30, 0.39 and 0.40 to 0.49 width x the length we have available....

  • 1.20 MM CARLISLE EPDM
    ROLLS OF DIFFERENT SIZES

    Available roll sizes: 3.05, 4.57, 6.10, 7.63, 9.15, 12.20 and 15.20 metres wide x 30.50 metres long. Price per m2...

  • CARLISLE EPDM PRESSURE-SENSITIVE SECUR TAPE 15 CM
    ROLL OF 15 CM x 30.50 M

    Facilitates the installation of the EPDM membranes. Ideal for covering and sealing two EPDM membranes, joint seams or simply for joining large custommade parts. As strong as the base sheet.  I...

  • HP 250 PRIMER CARLISLE
    3.8 LITRE CAN

    Carlisle HP-250 Primer is a solvent-based adhesive used for cleaning and priming the EPDM sheet, thus preparing it for the subsequent application of Flashing or SECUR-TAPE. INSTRUCTIONS FOR USE: - C...

  • WAX CHALK
    FOR EPDM MARKING

    Special chalk for marking EPDM sheets. It does not rub off with primer and does not rub off with water if it gets wet.      Price per unit....

  • POLYPROPYLENE ANTI-WEED GEOTEXTILE 120 GRAMS
    ROLL OF 2 x 100 M

    Non-woven geotextile made of 100% high tenacity Polypropylene staple fibres, mechanically bonded by a needle-punched and heat-set process, stabilised against UV rays.  ADVANTAGES:  - Anti-...

  • VERTICAL BOWL
    90 MM DIAMETER

    This cup model is used to connect the EPDM membrane to the floor drains.  This product facilitates the waterproofing work, while ensuring total watertightness. Resistant to corrosion, ozone, we...

  • PVC FLANGE
    90 MM DIAMETER

    Flange with PVC sleeve.  Today presión PVC fittings are still the only ones on the market with the AENOR quality mark. Flanges (clamps) for the drainage of natural pools, irrigation ponds...

  • 1.20 MM CARLISLE EPDM
    CUT PIECES

    From 0.50 to 0.99 cm wide x the length we have available....

  • FIBREGLASS MESH
    FOR RUBBER PAINT

    Fibreglass mesh for painting and external waterproofing with various resins and resin-additivated mortars, plaster reinforcement and internal plaster to prevent cracking.  1 x 50 m...

  • CARLISLE EPDM PUTTY
    LAP-SEALANT 250 ML

    It is mainly used to seal the exposed edges of EPDM membrane splices, and flashing. It can also be used as a sealant for mechanical terminations on vertical or horizontal surfaces, or EPDM membrane f...

  • OVERLAP ADHESIVE
    1 LITRE CAN

    Contact adhesive for bonding EPDM membrane overlaps. Good heat resistance. Develops excellent initial and final strength. Excellent resistance to ageing. Instructions for use:  - Stir the...

  • POLYPROPYLENE ANTI-WEED GEOTEXTILE 160 GRAMS
    2 M WIDTH x LENGTH AS REQUIRED

    Non-woven geotextile made of 100% high tenacity Polypropylene staple fibres, mechanically bonded by a needle-punched and heat-set process, stabilised against UV rays.  ADVANTAGES:  - Anti-...

  • 1.52 MM CARLISLE EPDM
    CUT TO SIZE

    We cut pieces to the size that our client needs, between 15.25 metres maximum width x 30.50 metres maximum length. Price per m2...

  • VERTICAL BOWL
    100 MM DIAMETER

    This cup model is used to connect the EPDM membrane to the floor drains.  This product facilitates the waterproofing work, while ensuring total watertightness. Resistant to corrosion, ozone, we...

  • 1.52 MM CARLISLE EPDM
    CUT PIECES

    From 0.20 to 0.29, from 0.30 to 0.39 and from 0.40 to 0.49 cm width x length we have available....

  • 150 GRAMS RECYCLED POLYESTER GEOTEXTILE
    2.20 M WIDTH x LENGTH AS REQUIRED

    100% recycled polyester geotextile. Suitable for the protection of EPDM membrane, both above and below. It offers mechanical resistance to puncture and tensile strength. Drainage capacity. Price p...

  • EPDM ROLLER
    FOR CORNERS

    The standard Brass Pressure applicator roller has a wooden handle and a basic closed bearing fork. The roller is ideal for internal corners for flashing application. The roller measures 6 mm wide x ...

  • 1.52 MM CARLISLE EPDM
    ROLLS OF DIFFERENT SIZES

    Available roll sizes: 3.05, 6.10, 7.63, 9.15, 12.20 and 15.20 metres wide x 30.50 metres long. Price per m2...

  • CARLISLE 22 CM FLASHING
    PER LINEAL METER

    The Pressure-Sensitive Elastoform flashing facilitates the installation of the EPDM membrane, for finishing joints, drains, corners and other singular points of the surface.  It is self-adhesive...

  • OVERLAP ADHESIVE
    5 LITRE CAN

    Contact adhesive for bonding EPDM membrane overlaps. Good heat resistance. Develops excellent initial and final strength. Excellent resistance to ageing. Instructions for use:  - Stir the prod...

  • « Anterior
  • 1

Este sitio web utiliza cookies

Utilizamos cookies propias y de terceros para personalizar el contenido, analizar nuestros servicios, ofrecer funciones de redes sociales, analizar el tráfico y mostrarle publicidad relacionada con sus preferencias en base a un perfil elaborado a partir de sus hábitos de navegación.

Revise y personalice sus preferencias de privacidad. Puede gestionar las cookies desde aquí:

Para descubrir como borrar las cookies Leer más